Contact Us
Industry News

Industry News

  • 30
    11
    2020
    Causes of Bearing Failure and Measures
    In order to maintain good performance of bearing for as long as possible, regular maintenance, testing and repair are necessary to prevent accidents and ensure the reliability of bearing operation.For...
  • 08
    11
    2020
    Purpose and Method of Bearing Lubrication
    Purpose of bearing lubrication:The lubrication purpose of the rolling bearing is to reduce the internal friction and prevent it from burning and sticking. The lubrication effect is as follows:(1) Redu...
  • 05
    11
    2020
    What are the Causes of Bearing Noise? And What are the Solutions?
    Bearing noise under different conditions and solutions1. A sound of hum will send when the bearing in a good state of continuous rotation. If it has a sharp hiss, squeak and other irregular sounds, it...
  • 02
    11
    2020
    What are the Main Solutions to Bearing Noise?
    There are three types of bearing noise caused by bearing application problems: the scar sound, the dust sound and lubrication factors, which are described as follows:1. The scar sound of bearing noise...
  • 28
    10
    2020
    What Material are Roller Bearings Made of
    1. Bearing alloyBearing alloy, namely babbitt alloy, is widely used. It usually comes in two types: tin-based bearing alloy and lead-based bearing alloy. With smooth surface it is usually used as bear...
  • 25
    10
    2020
    What is the Purpose of a Thrust Bearing
    A thrust bearing is generally composed of two or more thrust washers and several rolling elements. Generally, the thrust washer is divided into shaft piece and base piece, and the rolling element is c...
  • 22
    10
    2020
    What Can You Use to Clean Bearings
    To prevent corrosion during transportation or storage, precision bearings are usually packaged with a thin coat of anti-rust oil on the surface.In order to protect the bearings from poor lubrication c...
  • 19
    10
    2020
    What are Angular Contact Bearings Used for?
    Raceways are present on both inner and outer rings of angular contact bearings. There is relative displacement between the inner and outer rings along the axial direction of the bearing. Angular conta...
  • 16
    10
    2020
    Basic Knowledge of Cylindrical Roller Bearings
    Cylindrical roller bearing is in line contact with the raceway and has high radial load capacity. It is adapt to both heavy and shock loads as well as high speed rotation.Cylindrical roller bearing (C...
  • 13
    10
    2020
    How to Select Bearings
    There are several crucial factors to be considered during the selection of bearings.1. The load that the bearing can withstandThere are two kinds of loads. One is the axial load that is parallel to th...
  • 10
    10
    2020
    Working Principle and Installation Skills of Thrust Ball Bearings
    The thrust ball bearing is usually used in parts with low speed, such as crane hook, vertical water pump, vertical centrifuge, lifting jack, low-speed decelerator, etc. How do thrust ball bearings wor...
  • 07
    10
    2020
    What is the Code Numbers of Rolling Bearings?
    There are many rolling bearing types and sizes. For the convenience of design and selection, the types, sizes, structural features and tolerance grades of the rolling bearings are indicated by code nu...
  • 04
    10
    2020
    How are Rolling Bearings Classified
    Bearings are divided into two main categories, of which there are several types. The rolling bearings are first introduced. The classification of rolling bearings is mainly based on the shape of rolli...
  • 01
    10
    2020
    What are the Characteristics of Steel Roller Bearing?
    1. Contact fatigue strengthUnder periodic load, the surface of bearings is liable to be destroyed because of fatigue, i.e. chapped and flaked, which will greatly affect the service life of the bearing...
  • 28
    09
    2020
    What is the Use Of Bearings?
    To put it simply, the function of the bearing is to play a supporting role. If the transmission part (such as the shaft) is directly matched with the hole, the transmission resistance will be large, a...